Quote:
Originally Posted by faxmodem
Hi and bonjour,
My Touch Lux 3 (626) died and the original sd is garbage.
I've read this thread and concluded I need to find a vanilla image file and then run the `serial` command line with my SD's and my PB's serial numbers. How can I find those ?
Thanks !
|
I managed to save it by following the good advice in this thread.
I used the ".freezestatus method" and the problem I had worth mentioning here is that it didn't work at first because I was using the serial number printed on the device's sticker.
I then tried the serial number that was printed over the UART (had to solder 3 wires) when the device was booting, and it worked !
I also had to upgrade to a newer version of the firmware or else the backlight was flashing over and over again.
Cheers