04-15-2023, 09:54 AM | #541 |
Junior Member
Posts: 9
Karma: 10
Join Date: Apr 2023
Device: glowlight 4
|
Ok, good news. Using "fastboot flash boot nnglow21.img"and "fastboot reboot" I was able to get it into recovery successfully. This time "update-binary 2 1 /data/media/0/update.zip" worked and the device rebooted as expected. I didn't have to create recovery in /cache as it already existed. Upon setting up the device it immediately started updating to 8.1.4.45 and now it appears as if the device is back to oem as it's no longer rooted (assuming it was rooted in the first place, I couldn't check in time). Should I reattempt to root the device? I had assumed that the latest update was already installed and that it would be safe to connect to wifi. thank you
|
04-15-2023, 11:44 AM | #542 |
Wizard
Posts: 2,546
Karma: 10479009
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5
|
Oh, good.
Wasn't the update.zip that you used already the 45 version that I posted the link? Why would it update after booting normal system? In any case, you've seen that they make it almost impossible to get to "recovery". The stock "recovery" is only "flash factory". Edit: Certanly you can Magisk. I just used the boot.img extracted directly out of the 45 update.zip You can Magisk convert it then either "fastboot flash" or recovery & dd or like I did, just dd it in the rooted UART console. Last edited by Renate; 04-15-2023 at 01:28 PM. |
05-11-2023, 11:28 AM | #543 |
Junior Member
Posts: 1
Karma: 10
Join Date: May 2023
Device: nook glowlight 4
|
<font class="papago-parent"><font class="papago-source" style="display:none;">Hi! Always getting a lot of help.</font>안녕하세요! 항상 많은 도움을 받고 있습니다.</font><font class="papago-parent"><font class="papago-source" style="display:none;"> Is there a way to change screensaver?</font>화면 보호기를 변경할 수 있는 방법이 있습니까?</font><font class="papago-parent"><font class="papago-source" style="display:none;"> I really want to change.</font>저는 정말 바꾸고 싶어요.</font>
|
05-11-2023, 02:35 PM | #544 |
Wizard
Posts: 2,546
Karma: 10479009
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5
|
The default "sleep" images are in /system/media/SleepImageNook.
The files are called 1.png to 6.png If you are using Magisk you can write a module to overlay those files. They are obviously 1072 x 1448 PNG images. If you don't like Magisk you can flash neoglow21.img (in my sig) to recovery. Then you can mount system and delete 2.png to 6.png and replace 1.png Code:
mount -t ext4 /dev/block/mmcblk0p5 /system cp whatever.png /system/media/SleepImageNook/1.png reboot Last edited by Renate; 05-11-2023 at 02:53 PM. |
06-08-2023, 10:05 AM | #545 |
Wizard
Posts: 2,054
Karma: 15107670
Join Date: May 2017
Device: Sage, Scribe, Boox Note 2 Plus, iPad Pros and Samsungs S6,S7,S8
|
I wonder when its coming out?
|
08-31-2023, 12:52 AM | #546 |
Member
Posts: 13
Karma: 11102
Join Date: Aug 2023
Device: Nook Glowlight 4e
|
Is it necessary for update.zip in the rooting procedure to match the exact version of the nook firmware onboard? I assumed this, but in my case I could not update from the listed 8.1.4.43(A) to (hopefully) match the mentioned 8.1.4.45 update. I also tried to predict the url based on the mentioned examples, but both /4.43/ and /4.43A/ variants didn't work.
Thanks |
08-31-2023, 04:44 PM | #547 |
Member
Posts: 13
Karma: 11102
Join Date: Aug 2023
Device: Nook Glowlight 4e
|
Interestingly trying to work around the inability of my nook to upgrade over the air (see my previous post), discovered that the old way of manual update listed at this page kind of works on glowlight 4. So if I connect the device to the PC and copy update.zip file into to root of the storage drive then after disconnecting and about 50 seconds, Nook unexpectedly restarts and tries to upgrade the system. The only problem in my case was that the 8.1.4.43(A)->8.1.4.45 (downloaded from the link posted several times here and with https proto just in case) doesn't work with an error "Install failed'. It restores to the previous state, but mission was not complete unfortunately...
|
03-28-2024, 04:31 AM | #548 | |
Enthusiast
Posts: 32
Karma: 10
Join Date: Dec 2017
Device: Nook Glowlight 3, Glowlight 4, Hyread Gaze Mini+
|
EDIT:
Don't know what I did, may be reformat mmcblk0p1 with mkfs? After re-flashing neo noogie and misc-rec, and several reboots, it now works and I have successfully updated GL4, it is now back to factory again. Thank you for the wonderful Neo Noogie. Please disregard the rest of the reply. EDIT END ** Hi Renate, I have done something wrong to my GL4 and it is now totally blank. I managed to flash neo noogie and misc rec. However, when booting into recovery, I did not see the Neo Noogie splash. I can access adb and when installing update, UDISK is missing. Code:
E60P54_android:/cache # mount -t t2fs /dev/block/by-name/UDISK /data mount: '/dev/block/by-name/UDISK'->'/data': No such device Is there any way to create this partition and proceed with the update installation? Many thanks! Quote:
Last edited by plainbriny; 03-28-2024 at 05:58 AM. |
|
04-05-2024, 08:12 AM | #549 | |
Enthusiast
Posts: 36
Karma: 24
Join Date: Mar 2021
Device: KA2, KH2O2, KAOne, Nook4, KMini, PW5, K11, KV
|
Quote:
|
|
Tags |
nook |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Why I am avoiding the nook GlowLight [2013 nook GlowLight] | anmanwar@aol.com | Barnes & Noble NOOK | 20 | 04-24-2018 12:16 PM |
Adding cover thumbnails to the Nook ST (Nook Color & Nook Glowlight): how-to | kalwisti | Barnes & Noble NOOK | 0 | 10-31-2014 04:15 PM |
Barnes & Noble One Week Sale on Nook STR, Glowlight, Nook HD | charmian | Deals and Resources (No Self-Promotion or Affiliate Links) | 6 | 09-26-2013 10:36 AM |
Ended Nook Glowlight and Oberon Cover (for Nook Touch or Glowlight) | puglover333 | Flea Market | 1 | 09-20-2012 08:11 AM |